|
Copper Alloy ASTM B171 UNS C44300 Tube Sheets Baffles Plates Forged forging FRONT REAR Fixed STATIONARY Floating Cladding Clad Cladded Welding Welded Overlay Overlayed Coated Tubesheets Tube Plates
型号：
parameters1：
parameters2：
parameters3：
parameters1：
parameters2：
parameters3：
We are professional Copper Alloy ASTM B171 UNS C44300 Tube Sheets Baffles Plates Forged forging FRONT REAR Fixed STATIONARY Floating Cladding Clad Cladded Welding Welded Overlay Overlayed Coated Tubesheets Tube Plates from china
The following datasheet will provide more details about UNS C44300 brass alloys.
Chemical Composition
The following table shows the chemical composition of UNS C44300 brass alloys.
| Element | Content (%) |
|---|---|
| Cu | 71 |
| Sn | 1 |
| Zn | 28 |
Physical Properties
The physical properties of the UNS C44300 brass alloys are outlined in the following table.
| Properties | Metric | Imperial |
|---|---|---|
| Density | 8.53 g/cm3 | 0.308 lb/in³ |
Mechanical Properties
The mechanical properties UNS C44300 brass alloys are tabulated below.
| Properties | Metric | Imperial |
|---|---|---|
| Tensile strength | 331-379 MPa | 48000-55000 psi |
| Yield strength (depending on temper) | 124-152 MPa | 18000-22000 psi |
| Elongation at break (in 0 mm) | 65% | 65% |
| Creep strength (@425°C, time 3.60e+6 sec/797°F, time 1000 hr, 0.0001) | 0.370 MPa | 53.7 psi |
| Charpy impact | 82.4 J | 60.8 ft-lb |
| Fatigue strength (@# of cycles 1.00e+7, @# of cycles 1.00e+7, source does not state temper) | 115-125 MPa | 16700-18100 psi |
| Elastic modulus | 117 GPa | 17000 ksi |
| Poisson’s ratio | 0.34 | 0.34 |
| Machinability (UNS C36000 (free-cutting brass) = 100) | 30 | 30 |
| Shear modulus | 40.0 GPa | 5800 ksi |
Thermal Properties
The thermal properties UNS C43500 brass alloys are tabulated below.
| Properties | Metric | Imperial |
|---|---|---|
| Thermal expansion co-efficient (@20-300°C/68-572°F) | 20.2 µm/m°C | 11.2 µin/in°F |
| Thermal conductivity (@20°C/ 68°F) | 110 W/mK | 763 BTU in/hr.ft².°F |
Products Search
