|
Admiralty Brass ASTM B171 UNS C44500 Forged Forging Flanges Discs Disks Rings Sleeves Bushes Bushing Pipes Piping tube tubings Shells Housing Cases Casings Forged Parts
型号：
parameters1：
parameters2：
parameters3：
parameters1：
parameters2：
parameters3：
We are professional Admiralty Brass ASTM B171 UNS C44500 Forged Forging Flanges Discs Disks Rings Sleeves Bushes Bushing Pipes Piping tube tubings Shells Housing Cases Casings Forged Parts from china
UNS C44500 alloys are a type of brass-copper alloys with phosphorized feature. It is also known as admiralty brass. These alloys have good corrosion resistance and cold workability. The following datasheet will provide details about UNS C44500 phosphorized brass-copper alloys.
Chemical Composition
The following table shows the chemical composition of UNS C44500 phosphorized brass-copper alloys.
| Element | Content (%) |
|---|---|
| Cu | 71 |
| Sn | 1 |
| Zn | 28 |
Physical Properties
The physical properties of UNS C44500 phosphorized brass-copper alloys are outlined in the following table.
| Properties | Metric | Imperial |
|---|---|---|
| Density | 8.53 g/cm³ | 0.308 lb/in³ |
Mechanical Properties
The mechanical properties UNS C44500 phosphorized brass-copper alloys are tabulated below.
| Properties | Metric | Imperial |
|---|---|---|
| Tensile strength | 331-379 MPa | 48000-55000 psi |
| Yield strength (depending on temper) | 124-152 MPa | 18000-22000 psi |
| Elongation at break (in 0 mm) | 65% | 65% |
| Creep strength (@425°C, time 3.60e+6 sec/797°F, time 1000 hr, 0.0001) | 0.370 MPa | 53.7 psi |
| Elastic modulus | 117 GPa | 17000 ksi |
| Poisson’s ratio | 0.34 | 0.34 |
| Charpy impact | 82.4 J | 60.8 ft lb |
| Fatigue strength (@# of cycles 1.00e+7,@# of cycles 1.00e+7, source does not state temper) | 115-125 MPa | 16700-18100 psi |
| Machinability (UNS C36000 (free-cutting brass) = 100) | 30 | 30 |
| Shear modulus | 40.0 GPa | 5800 ksi |
Products Search
