|
ASTM A291/A291M A 291 Gr7 Grade 7 Class 4 Class D Class 5 Class 3 Forged forging Steel Round Bars Hollow Bars Rods Square rectangular rectangle Blocks Discs Disks Plates Flat Hex Bars
型号：
parameters1：
parameters2：
parameters3：
parameters1：
parameters2：
parameters3：
We are professional ASTM A291/A291M A 291 Gr7 Grade 7 Class 4 Class D Class 5 Class 3 Forged forging Steel Round Bars Hollow Bars Rods Square rectangular rectangle Blocks Discs Disks Plates Flat Hex Bars ASTM A291 Class B Grade 3 Class C Grade 4 Grade 5 Grade 6 Grade 7 Classes E Class F Class G Grade 8 Grade 9 Class J Grade 1 Grade 2 Grade 8 Grade 9 From china
ASTM A291 / A291M
1. Scope
1.1 This specification covers normalized and tempered carbon steel and quenched and tempered alloy steel forgings for pinions, gears, and shafts.
1.2 Several grades of steel are covered as follows:
1.2.1 Grade 1, Class A,is normalized and tempered carbon steel.
1.2.2 Grade 2, Class B, Grade 3, Class C, Grade 3A, Class D, Grades 4 to 7, Classes E, F, G, and H, Grade 8, Class I, and Grade 9, Class J, are liquid quenched and tempered alloy steel.
1.3 All grades and classes are considered weldable under proper conditions. Welding technique is of fundamental importance and it is presupposed that welding procedure and inspection shall be in accordance with approved methods for the class of material used.
1.4 The values stated in either SI units or inch-pound units are to be regarded separately as standard. The values stated in each system may not be exact equivalents; therefore, each system shall be used independently of the other. Combining values from the two systems may result in non-conformance with the standard.
1.5 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.
Products Search
