|
P265GH 1.0425 Forged Forging steel Rings Rolled Rings Forging Sleeves Flanges Bushes Bushing Pipes Piping tubes tubings barrels Casing Cases Shells cylinders hubs housings Parts Pieces Material Produc
型号：
parameters1：
parameters2：
parameters3：
parameters1：
parameters2：
parameters3：
We are professional P265GH 1.0425 Forged Forging steel Rings Rolled Rings Forging Sleeves Flanges Bushes Bushing Pipes Piping tubes tubings barrels Casing Cases Shells cylinders hubs housings Parts Pieces Material Products from china
| C | Si | Mn | Ni | P | S | Cr | Mo | V | N | Nb | Ti | Al | Cu | - |
| max 0.2 | max 0.4 | 0.8 - 1.4 | max 0.3 | max 0.025 | max 0.015 | max 0.3 | max 0.08 | max 0.02 | max 0.012 | max 0.02 | max 0.03 | max 0.02 | max 0.3 | Cr+Cu+Mo+Ni < 0.7 |
Mechanical properties of steel P265GH (1.0425)
| Nominal thickness (mm): | to 100 | 100 - 150 | 150 - 250 |
| Rm - Tensile strength (MPa) (+N) | 410-530 | 400-530 | 390-530 |
| Nominal thickness (mm): | to 16 | 16 - 40 | 40 - 60 | 60 - 100 | 100 - 150 | 150 - 250 |
| ReH - Minimum yield strength (MPa) (+N) | 265 | 255 | 245 | 215 | 200 | 185 |
| KV - Impact energy (J) transverse, (+N) | -20° 27 | 0° 27 | +20° 40 |
| KV - Impact energy (J) longitud., | -10° 28 | 0° 40 | +20° 47 |
| A - Min. elongation at fracture (%) (+N) | 22-23 |
| A - Min. elongation at fracture (%) transverse, (+N) | 21 |
Products Search
