|
Hastelloy Alloy B-2 B2 UNS N10665 2.4617 NiMo28 Forged Forging Rings Rolled Rings Forging Sleeves Bushes Bushing Pipes Piping tubes tubings barrels Casing Cases Shells cylinders hubs housings Parts
型号：
parameters1：
parameters2：
parameters3：
parameters1：
parameters2：
parameters3：
We are professional Hastelloy Alloy B-2 B2 UNS N10665 2.4617 NiMo28 Forged Forging Rings Rolled Rings Forging Sleeves Bushes Bushing Pipes Piping tubes tubings barrels Casing Cases Shells cylinders hubs housings Parts Pieces Material Products from china
Chemical Composition
| C | Si | Mn | P | S | Cr | Mo | Ni | Co | Fe | Cu | ||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 2.4617 | Min % | 26,00 | balance | |||||||||
| Max % | 0,01 | 0,08 | 1,00 | 0,025 | 0,015 | 1,00 | 30,00 | balance | 1,00 | 2,00 | 0,50 | |
| (Key to Steel 2010) | ||||||||||||
| alloy B-2 N 10665 | Min % | 26,00 | balance | |||||||||
| Max % | 0,02 | 0,10 | 1,00 | 0,04 | 0,03 | 1,00 | 30,00 | balance | 1,00 | 2,00 | ||
| ASTM B 622 | ||||||||||||
Physical properties
| Property | Value |
|---|---|
| Density: lb/in3 | 0,333 |
| Hardness: HB | <=250 |
| Permeability at 20°C/68°F | <1,001 |
| Temperature T °C/F (°C/F) | Specific heat J / kgK (Btu / lb °F) | Thermal conductivity W/mK (Btu·in / ft2·h·°F) | Electric resistance µΩ · cm (Ω circ mill / ft) | Modulus of elasticity kN/mm2 (103 ksi) | Expansion rate from 70°F bis T 10-6 / K (10-6 / °F) |
|---|---|---|---|---|---|
| 0 | 373 | 11,1 | 137 | 218 | |
| 20 / 68 | 377 | 11,4 | 137 | 217 | |
| 100 / 212 | 389 | 12,2 | 138 | 213 | 10,3 |
| 200 / 392 | 406 | 13,4 | 138 | 208 | 10,8 |
| 300 / 572 | 423 | 14,6 | 139 | 203 | 11,1 |
| 400 / 752 | 431 | 16,0 | 139 | 197 | 11,4 |
| 500 / 932 | 444 | 17,3 | 141 | 191 | 11,6 |
| 600 / 1112 | 456 | 18,7 | 146 | 184 | 11,8 |
| 700 / 1292 | 176 |
Mechanical properties (20°C / 68°F)
| Yield strength min.ksi (MPa) | 51 (350) | ||
|---|---|---|---|
| Yield strength | 380-370 | ||
| Tensile strength (offset0,2%)min. ksi | 110 | ||
| Elongation in 2 in.(50,8 mm)% | 40% | ||
| ISO-V Notched impact strength (Average value at 20°C/68°F) | 150(J/cm2) | ||
| ISO-V Notched impact strength (bei-321°F) | 120J/cm2 | ||
Products Search
