|
1.8903 S460NL TStE 460 TStE460 Forged Forging Steel Round Bars Hollow Bars Shafts Square rectangular rectangle Blocks Discs Disks Plates Flat Bars
型号：
parameters1：
parameters2：
parameters3：
parameters1：
parameters2：
parameters3：
We are professional 1.8903 S460NL TStE 460 TStE460 Forged Forging Steel Round Bars Hollow Bars Shafts Square rectangular rectangle Blocks Discs Disks Plates Flat Bars from china
Chemical composition % of steel S460NL (1.8903): EN 10025-3-2004
Mechanical properties of steel S460NL (1.8903)
| Nominal thickness =< 63(mm) CEV max = 0.53 Nominal thickness from 63 to 100 (mm) CEV max = 0.54 For long products the P and S content can be 0.005% higher For railway application a maximum S content of 0.01% may be agreed at the time of enquiry and order In sufficient other N-binding elements are present the minimum total Al content does not applay Cu content above 0.4% may cause hot shortness during hot forming |
| C | Si | Mn | Ni | P | S | Cr | Mo | V | N | Nb | Ti | Al | Cu | CEV |
| max 0.2 | max 0.6 | 1 - 1.7 | max 0.8 | max 0.025 | max 0.02 | max 0.3 | max 0.1 | max 0.2 | max 0.025 | max 0.05 | max 0.05 | max 0.02 | max 0.55 | max 0.55 |
Mechanical properties of steel S460NL (1.8903)
| Nominal thickness (mm): | to 100 | 100 - 200 |
| Rm - Tensile strength (MPa) | 540-720 | 530-710 |
| Nominal thickness (mm): | to 16 | 16 - 40 | 40 - 63 | 63 - 80 | 80 - 100 | 100 - 150 | 150 - 200 |
| ReH - Minimum yield strength (MPa) | 460 | 440 | 430 | 410 | 400 | 380 | 370 |
| KV - Impact energy (J) longitud., (+N) | +20° 63 | 0° 55 | -10° 51 | -20° 47 | -30° 40 | -40° 31 | -50° 27 |
| KV - Impact energy (J) transverse, (+N) | +20° 40 | 0° 34 | -10° 30 | -20° 27 | -30° 23 | -40° 20 | -50° 16 |
| Nominal thickness (mm): | to 16 | 16 - 40 | 40 - 63 | 63 - 80 | 80 - 200 |
| A - Min. elongation Lo = 5,65 √ So (%) | 17 | 17 | 17 | 17 | 17 |
Products Search
